Fibreglassdirect - Catalysts / 0.2 kg Catalyst

0.2 kg Catalyst
[2xC0060]

£4.90

Click to enlarge

Price above is ex VAT and ex Delivery
Catalyst is the standard curing agent for Polyester Resins, Top Coats and Gelcoats.

Thorough mixing of catalyst into resins and gelcoat is very important. Addition of the correct amount ensures the best results. The table below gives the correct ratios of catalyst to resin and gelcoat by weight. 1% is considered a slow mix, 2% is ideal, 3% is a fast mix. Additions outside these bands in not recommended for proper curing. The addition of more than 4% may result in a failure to cure. The pot life of these mixes is also determined by temperature. The higher the temperature the faster the cure. As a general guide 2% addition at 20ºC gives 15-20 minutes pot life. The resin cures quicker if left in a large quantity such as in the mixing bucket or in castings.

Catalyst Mixing Ratio: 1gm of catalyst = 1cc

For the product safety data sheet , click here

Customers who bought this product also purchased

150mm Glass Fibre Tape - 50m	Brush - Plastic Handle 25mm (1.0") Box of 12	2.5kg Non-Slip Clear Topcoat & Catalyst
4.0kg Acetone (5 x 0.8 kg)	Bonding Adhesive Paste 7kg and Catalyst	5kg Black Polyester Gelcoat & catalyst