Fibreglassdirect - Roof Trims / A200 Drip Trim

A200 Drip Trim
[M0036GC-1]

£9.75

Click to enlarge

Price above is ex VAT and ex Delivery

The A type trim is a drip trim, fitted to the lowest edge of the roof usually where the rainwater flows into the gutter.

Dimensions:

Girth: 200mm; Depth: 90mm; Length: 3m

Fitting Instructions

Two support battens should be fixed to the perimeter of the roof to provide space for the gutter to fit behind the trim, with the outer batten attached 10mm lower than the inner batten to allow the trim to sit flush with the roof.

Apply trim adhesive to the batten in 30mm beads at 300mm centres, rub the trim into place and nail to the decking. Do not nail through the front of the trim. If the pitch of the roof is only minimal, rainwater is likely to hold behind the trim. A planning machine can be used to take 2mm off the deck to allow the trim to lay flush with the board.

From the following dropdown, please indicate whether you are ordering "Less than 10" or "10 or more". You will be entitled to a price reduction when ordering "10 or more."
On the next page you will enter the exact quantity.

Available Options:
Quantity:

Current Reviews: 1

Customers who bought this product also purchased

1 Ltr Plastic Bucket	450g Chopped Strand Mat 25kg (55.56m²)	Ribbed Roller 25x150mm
4.0kg Acetone (5 x 0.8 kg)	5kg Polyester Top Coat - Brilliant Red & catalyst	C3 External Corner for D260 wall fillet trim