Fibreglassdirect - Roof Trims / B260 Raised Edge Trim

B260 Raised Edge Trim
[M0066GC-1]

£11.75

Click to enlarge

Price above is ex VAT and ex Delivery

Fitted to the roof edge, this trim prevents water run off.

Dimensions:

Girth: 260mm; Depth: 125mm; Length: 3m

Fitting Instructions

A single batten is fixed level with the top edge of the deck. Apply 30mm beads of trim adhesive to the batten every 300mm, rub the trim into place and nail through the top of the trim into the decking. Do not nail through the front of the trim.

If a ladder is likely to be leant against a B type trim for regular access to the roof, the trim will need to be reinforced to avoid deformation. The trim can either be doubled up by slotting a section of extra trim within the section where the ladder will be used or it can be reinforced with an extra layer of GRP laminate and then tissue to maintain a smooth finish. Alternatively, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid.

From the following dropdown, please indicate whether you are ordering "Less than 10" or "10 or more". You will be entitled to a price reduction when ordering "10 or more."
On the next page you will enter the exact quantity.

Available Options:
Quantity:

Current Reviews: 1

Customers who bought this product also purchased

450g Chopped Strand Mat 25kg (55.56m²)	Ribbed Roller 25x150mm	4.0kg Acetone (5 x 0.8 kg)
C3 External Corner for D260 wall fillet trim	150mm Glass Fibre Tape - 50m	20m² Fibreglass Roof Kit (without tools)