Fibreglassdirect - Roof Trims / D260 Wall Fillet Trim

D260 Wall Fillet Trim
[M0035GC-1]

£9.75

Click to enlarge

Price above is ex VAT and ex Delivery

Used where flatroof butts against existing wall and creates a 45 degree angle to deflect rainwater from wall to roof. Can also be used for gutter lining. It will also provide expansion and perimeter ventilation and is compatible with C2 and C3 universal corners.

Dimensions:

Girth: 260mm; Fillet: 135mm & 70mm; Upstand height: 120mm; Length: 3m

Fitting Instructions:

Place the D trim against the vertical face and push down diagonally into the corner until the trim fits snugly. Where the D trim needs to be joined it should be bonded with a strip polyurethane adhesive and bandaged together. The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc. Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim.

Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in. A smooth finish can be obtained by wiping the sealant with a moistened finger.

From the following dropdown, please indicate whether you are ordering "Less than 10" or "10 or more". You will be entitled to a price reduction when ordering "10 or more."
On the next page you will enter the exact quantity.

Available Options:
Quantity:

Current Reviews: 1

Customers who bought this product also purchased

15 ml Catalyst Dispenser	450g Chopped Strand Mat 20kg (44.44m²)	C3 External Corner for D260 wall fillet trim
AT 195 External Trim (3m Length)	5kg Polyester Top Coat - Dark Olive & catalyst	9" Single Arm Frame