Gelcoat is not a finishing coat; it is painted onto moulds/plugs and remains tacky after it cures. Resin and Glass are generally applied on top of the Gelcoat. It forms the hard, smooth shiny surface of the finished article and is usually pigmented. It paints on easily but does not drain from vertical surfaces. Use Topcoat if a finishing paint is required.

If the area has an old layer of Topcoat which you wish to refresh there is no need to prime the area with a product such as G4 for example. You will, however, need to sand down the area, wipe down with Acetone and reapply a new layer of Topcoat/GRP materials if required.

To answer this question in a lot of detail, we have created a comprehensive guide in our how-to section which is available to read on our website.

This depends on the type of mould you are trying to make (male or female). In this case, it sounds like you need a gelcoat rather than a topcoat. Please refer to our guide on making a mould which will detail the mould making process.

The expected coverage of the Standard Polyester Topcoat and Gelcoat is 500g per square metre.

Yes, our Polyester Topcoat is safe for use for Ponds. It is important to let the Styrene completely evaporate from the Topcoat before re-introducing the fish to the Pond.