1. See Detail

C100 Lead Flashing Roofing Trim - 3 metre length (10 Pack)

SKU
9907009x10
In stock
Quick Overview
Pack of 10 C100 Lead Flashing Roofing Trims Dimensions Length: 3m Vertical cover: 100mm Wall penetration: 35mm Dark grey, non-adhesive finish to simulate the appearance of lead. Do not topcoat.
£118.80 £99.00
Fitting Instructions

The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc.

Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim. Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in.

Roofing Trim FAQ's

Q. Which roofing trims are compatible with each other?

Q. What is the difference between a drip roofing trim and raised edge trim?

Q. What is the best way to apply roofing trims?

Q. Should I use special nails to secure the trims?

Q. I have a crack in my GRP Roofing Trim – how do I fix it?

Q. Can I use lead or metal trims with a GRP Roof?

Ask a Question
The following trims are compatible with each other
  • A200 is a fascia trim for allowing drainage into a gutter. Compatible with C1 C2 and C4 corner trims
  • B260 is a raised edge trim which prevents water runoff. Compatible with C1 C2 and C4 corner trims
  • A200 and the B260 are compatible with each other
  • A250 and B300 - A250 is a fascia trim for allowing drainage into a gutter & the B300 is a raised edge trim which prevents water... Read more
    Published in: Roofing Trims