This trim is fitted to the roof edge to allow drainage into a gutter. The increased length of the gutter leg allows this trim to be used on warm roof specifications where insulation is applied under the boarding.
The AT195 Internal trim is used wherever the laminate needs to cover an area which continues perpendicular to another laminated surface. The AT195 Ext is supplied with a high-adhesion finish on its outer fascia and is mainly used for capping applications.
The AT195 External Fibreglass Roofing Trim is used when forming external corners on features such as steps or wall tops, it can be used horizontally or vertically. If an Internal Corner is needed, the AT195 Internal Trim is ideal.
The C150 Simulated Lead Flashing Trim is has a 150mm vertical face and 35mm wall penetration. It is suitable as a replacement for traditional lead flashings. It is supplied with a dark grey, non-adhesive finish. Topcoat does not need to be applied to this trim.
The Soudaflex GRP Trim Adhesive is suitable for sealing Trims around the perimeter of the roof. It is extremely easy to apply, adheres well and is resistant to many chemicals. It should be applied with a skeleton gun.
FibreGlassDirect roof kits provide all fibreglass materials and tools needed to complete a flat roof repair. We supply a comprehensive range of GRP Roofing Materials such as Trims, Kits, Resins and Topcoats which are specific for Roofing.
Our all in one Roof Kits are designed to make flat roof repairs affordable and easy to use for professionals and homeowners alike. Each roofing kit allows for extra materials to cover overlaps, cutting and bandaging of joints. The ratio of resin is 1.5kg and 0.6kg of topcoat per square metre.
The calculations provided are based on the information given. Tricel cannot be held responsible for the use made of the products thereafter. Copyright � 2017 Tricel Composites (NI) Ltd. All rights reserved.