Milled Fibres may be added to resin to turn the resin into a paste if desired. This provides reinforcement and filler in plastic composites, adhesives and coatings.
In cases of deeper scratches, milled fibre may be mixed with Resin before adding the catalyst. The mixture should be the same consistency as mayonnaise. This should then be applied into the repair. Once cured, the area may be sanded as required before moving on to the laminating stage.
The fibers are compatible with thermoplastic materials (including Teflon*) and thermoset materials such as polyester, phenolic, silicones and epoxy. Milled Fibers are also compatible with most asphalt, putties, patching cements and other coatings.