220kg Lloyd's Approved General Purpose Resin & 5kg Catalyst

In stock

SKU

K9901005

£1,036.66 £863.88

220kg Lloyd's Approved Polyester Resin suitable for marine use. 5kg catalyst is supplied with this product.

Skip to the beginning of the images gallery

This resin (Norsodyne H 13212) is a pre-accelerated, thixotropic, low styrene emission Lloyds approved Polyester Resin with fast glass wet out and low exotherm characteristics.

The resin is also WRAS approved for use in potable water applications and used extensively in water tank construction and water treatment applications.

Lloyds approved general purpose resin that can be used for all marine and boat applications including new build, repair and maintenance.

It has a low viscosity, low styrene emission resin providing fast wet out of Fibreglass by hand lay-up or spray manufacturing. This resin can also be used for the manufacture of tanks for the storage of potable water.

Do you have a forklift or do you require a delivery truck with a tail lift to deliver this order? If you do not have a forklift, please mention this in the "Comments Box" during the order process so we can organise a truck with a tail lift, there will be no extra cost for this.

Ask a Question

I wish to coat an air dry clay model to give it a waterproof coating. Which resin would you recommend?

We would recommend our Lloyd's Approved Resin, this would be a good general purpose resin suitable for this purpose.

Published in: Resin, Catalyst & Laminating

How long does the resin take to harden? (eg 5 minutes or 30 minutes)

This depends on the temperature of your working conditions and how much catalyst has been incorporated into the mix. Warmer temperatures will reduce your curing time and colder temperatures will increase the length of cure. Likewise, adding extra catalyst will speed up the curing process - often necessary for colder temperatures and reducing catalyst will reduce curing - again often necessary during warmer temperatures. We would recommend mixing no more than 1.5 - 2kg at a time. Once the resin and catalyst are mixed, the curing process will begin and you are working against the clock to get the resin applied - usually no more than 20 minutes. Only mix as much as you need. Epoxy Resin is mixed on a ratio basis and should not be altered. Room temperature is the ideal scenario for curing. Each resin type will differ so we would always recommend referring to the MSDS and TDS available on each product listing before use. Although some resins may be hard to the touch after 24 hours, some may not be fully cured for up to 3 days. Again, this information will be available on the product Technical Data Sheet... Read more

Published in: Resin, Catalyst & Laminating

Brand	Description
History	Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien.