We value your privacy
Please be aware that from 24th August 2023, all professional and industrial workers (employed or self-employed), using mixtures containing diisocyanates at a concentration of 0.1% or more (e.g., insulation and filler foams used in construction etc), must undergo mandatory training.
The TriDrive Bound Driveway Kit is the perfect kit for ensuring your stone does not budge. This two-part, Polyurethane system is hard-wearing and UV stable. This system has been specifically formulated for resin bound aggregate paving and driveway systems. It must be mixed with Klin dried Aggregate which is also available to purchase in a variety of colours from FibreGlassDirect.
Each pack consists of two components, a base and an activator component in sealed containers. TriDrive UV Resistant Resin System for Bound Paving currently comes in a 7kg pack size (split between Part A + Part B), which is designed for a 100kg aggregate blend, when using our natural aggregates.
Our range of natural, kiln-dried aggregates is available in a 1mm-3mm, and 2mm-5mm range, ideal for the TriDrive system. Larger-sized aggregates can be used with a corresponding adjustment to resin film thickness.
The shelf life of TriDrive UV Resistant Resin System for Bound Paving is 12 months when undercover in dry conditions. Do not allow extreme temperature fluctuations.
TriDrive is manufactured as a binder with a resin-bound aggregate paving system. It is suitable for both external and internal use.
Areas of use include:
TriDrive is a permeable system and therefore SUDS compliant. SUDS (Sustainable Urban Drainage Systems) is the name given to the relevant UK Government legislation that came into effect in October 2008. SUDS are surface waste and drainage management methods that are designed to tackle excess water in a sustainable and economical way compared to conventional systems. This is to prevent flooding, particularly in built-up areas.
TriDrive UV Resistant Resin System for Bound Paving has been developed as a SUDS compliant permeable system. TriDrive UVR allows water to soak through the surface, helping rapid surface water runoff that causes flooding.
A TriDrive UV Resistant Resin System for Bound Paving requires minimal maintenance. To Maintain the appearance of the surface, regular sweeping with a stiff brush to keep the area free from leaves, loose aggregates, and any other general detritus. Mechanical brushes with steel/metal bristles must not be used. For any stains caused by oil spillages, most domestic detergents or degreasers can be used to remove ingrained dirt, with cold pressure washing. However, care must be taken to avoid high-pressure jet washing.
| 10 square metres | 4 Resin Bound Kits / 8 x 25kg 1-3mm Aggregate / 8 x 25kg 2-5mm Aggregate |
| 15 square metres | 5 Resin Bound Kits / 10 x 25kg 1-3mm Aggregate / 10 x 25kg 2-5mm Aggregate |
| 20 square metres | 7 Resin Bound Kits / 14 x 25kg 1-3mm Aggregate / 14 x 25kg 2-5mm Aggregate |
| 25 square metres | 9 Resin Bound Kits / 18 x 25kg 1-3mm Aggregate / 18 x 25kg 2-5mm Aggregate |
| 30 square metres | 10 Resin Bound Kits / 20 x 25kg 1-3mm Aggregate / 20 x 25kg 2-5mm Aggregate |
| 40 square metres | 13 Resin Bound Kits / 26 x 25kg 1-3mm Aggregate / 26 x 25kg 2-5mm Aggregate |
| 50 square metres | 17 Resin Bound Kits / 34 x 25kg 1-3mm Aggregate / 34 x 25kg 2-5mm Aggregate |
Warning! Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.’ Protective gloves to be supplied with this product.
Please be aware that from 24th August 2023, all professional and industrial workers (employed or self-employed), using mixtures containing diisocyanates at a concentration of 0.1% or more (e.g., insulation and filler foams used in construction etc.), must undergo mandatory training.
Danger
Hazard Statement(s) - TriDrive Resin Bound - Part B H319: Causes serious eye irritation.
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H373: May cause damage to organs through prolonged or repeated exposure.
H335: May cause respiratory irritation.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H351: Suspected of causing cancer.
H332: Harmful if inhaled.
Precautionary Statement(s) P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: [In case of inadequate ventilation] wear respiratory protection.
P302+P352: IF ON SKIN: Wash with plenty of water/…
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.
| Brand | Description |
| History | Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien. |
