Mould Making Supplies
Subcategories
-
Freefix Bonding Adhesive Paste & CatalystAs low as £9.72 £8.10
Polyester bonding pastes are used for the bonding and assembly of Fibreglass mouldings. The bonding paste is pre-accelerated and requires the addition of 2% BPO paste as a catalyst (supplied). The pastes can also be used as a gap filler to reduce air voids in laminates. For further application instructions, please see the description below.
Learn More -
-
Newplast White Plasticine Clay£1.80 £1.50Non-toxic plasticine from Newplast. Excellent for creating radii in patterns. Can be gelcoated over with no reaction from plasticizer in plasticine. Learn More
-
Farecla 500 Med Cut Paste 1 Litre£25.20 £21.00A quick, economical product to be used with a lambswool pad to remove small scratches and swirl marks to give a high gloss finish. Best used in conjunction with Profile 200 Learn More
-
Farecla 200 Coarse Paste 1 Litre£30.00 £25.00A coarse cut compound to remove scratches up to P800 level. Use with a wool or foam compounding head. Best used in conjunction with Profile 500 Learn More
-
-
Fibreglass Chopped StrandsAs low as £2.58 £2.15
Chopped strands or "choppies" are either 4.5 or 6mm Fibreglass strands that can sprinkled into sharp internal corners to provide reinforcement.
Learn More -
50g BPO Catalyst Sachet£1.50 £1.25- Benzoyl peroxide catalyst paste - Stable catalyst - Easy to use, re-sealable sachet - Effective and rapid hardening Learn More
-
-
Flexible Steel Filling Knife Set£2.34 £1.95Set of four flexible steel filling knives that are ideal for the application of body filler or bonding paste. Four widths: 5, 8, 10 and 12cm. All with a plastic handle along the top edge. Learn More
-
Polyester GelcoatAs low as £9.18 £7.65
WRAS Approved range of coloured Polyester Gelcoats. Choose from White, Black, Dove Grey, Bright Blue or Dark Olive. If you require a bespoke colour, choose 'Clear' which may be pigmented to your desired colour.
Learn More -
TR 104 Hi Temp Hard Mould Release Wax£17.10 £14.25Superior hard release wax formulated from highest quality Carnuba wax blended with organic process aids. Easily buffed to a high gloss finish, TR104 provides a durable and abrasion resistant release interface. Minimal wax built up occurs when moulds are c Learn More
-
CIL Release 1711E 500ml Aerosol Spray Release£12.60 £10.50CILRelease 1711E is a silicone based aerosol release agent and the industry standard for the release of epoxy and polyester resin mouldings from silicone moulds. For best results, spray lightly and evenly onto the mould surface. Any excess should be wiped Learn More
-
PVA Gloss Release 4.5kg£27.54 £22.95Easy to use liquid release agent which is supplied with a blue pigment addition. Blue pigment is supplied to gauge the coverage of a mould surface. For best results we recommend that this product is spray applied but can be applied with a sponge or soft cloth if desired. Learn More
-
PVA Mat Release 4.5kg£33.00 £27.50PVA Mat Release is suitable for use if a matt finish is required. For best results this product should be spray applied. This product is also supplied with a blue pigment addition which makes it easier to gauge coverage of a mould surface. Learn More
FibreGlassDirect offer a wide range of mould making supplies including release agents, compounding materials, bonding pastes and application tools.
