Premium Fibreglass Roof Kit
Our premium Fibreglass Roofing Kits (1 - 100sqm) are supplied with 1 layer of 450g or 600g Matting, Fire Retardant Topcoat (Dark Grey) and Flexible Roofing Resin.
Please select the size required followed by any tool requirements. Tools are automatically included from 1-25 sqm. All size options above are available with or without tools.
Fibreglass Roof Kits are supplied complete with all the materials and tools needed to cover the area required with 1 layer of 450g/m² glass fibre mat and 1 layer of grey pigmented topcoat. Fibreglass is the ideal material for weatherproofing flat roofs laid with plywood, OSB board or HDF board. It has a 30-year history of successful use.
The finished, watertight grey topcoat surface is smooth and easy to clean and maintain. The roofing system has been fire tested to BS 476 pt 3 external fire exposure roof test and achieved an EXT.F.AB rating.
The most important element to fibreglass roofing is the materials. At Fibreglass Direct we only supply the highest quality materials.
Included in our kits are the following important materials that other suppliers may not include for:
- Flexible Resin. This helps the roof to withstand thermal expansion/contraction variations, slight movement in roof flexing due to people walking on it and slight movement in roof alignment due to settling.
- Fire Resistance Top Coat to BS 76 Part 3.
We have given some extra material in each roofing kit to allow for cutting, overlapping and bandaging of joints. The ratio of resin is 1.5kg and 0.6kg of Topcoat per square metre.
You may also require glass bandage roll and acetone to complement your roofing kit.
For help on installing your new fibreglass flat roof visit our Fibreglass roofing tips and tutorials page.
Complete GRP / Fibreglass Roof Installation
In this instance, a fibreglass roof kit may be used to complete the repair. The first step would be to sand back the exisiting surface to expose the fibreglass and then clean with acetone. Measure the amount of fibreglass mat you will need.
Cut your new fibreglass mat into strips of an appropriate width for covering over the cracks. Ensure there is an overlap of 50mm either side of the crack.
Apply a wet coat of resin to the surface and bed down the new matting. Ensure the... Read more
In short, no. The deck would have to be sanded back to the fresh timber and wiped down with Acetone prior to any fibreglass application.
Yes, a Fibreglass Roof can be walked on. Depending on the volume of foot traffic expected for the roof to take, this will determine the weight of matting that should be used in the construction of the roof. A roof with little to no foot traffic expected would suit 1 layer of 450g matting, a moderate level of foot traffic should use 1 layer of 600g matting and a balcony or a roof with regular foot traffic should use 2 layers of 450g matting. A non-slip Topcoat is also highly recommended for... Read more
Quite simply put, it’s down to the quality of the materials. Our Fibreglass Roof Kits have been sold for 30 years throughout the UK and Ireland. We have only ever bought from trusted composite manufacturers who supply material that we have rigorously tested.
What is contained in the Fibreglass Roof Kits?
In our Read more