We value your privacy

Our website uses cookies to enhance your experience. By continuing to use our website, you are agreeing to our use of cookies. Necessary cookies are always enabled. You can read more about our Cookie Policy in our Privacy policy

We value your privacy

FibreGlassDirect - Buy Fiberglass Supplies & Materials

Shopping Cart 0
£0.00

2kg Clear Art Epoxy Resin

Out of stock
SKU
102563
£94.99 £79.16

Our Art Resin is an optically Clear Epoxy Resin which is perfect for sealing and protecting artwork, paintings and sculptures.

The resin may be tinted as desired with a suitable pigment.

Advantages:

  • Non-flammable
  • No odour
  • User friendly - easy to mix and apply

Application details:

The mixing ratio is 1:1 and must be strictly adhered to. The ratio cannot be altered. The mixture should be stirred for 3-4 minutes before application. We would recommend only mixing as much as is needed as the resin will heat quickly, affecting the pot life of the resin.

The Art Resin can be applied by hand pouring or with a brush/roller. Ensure your piece is completely level to avoid 'pooling'. Any bubbles which may occur during the hand mixing stage, can be popped using a sharp object or by passing warm air over the area with a blow torch or hot air dryer. (If using this method, ensure that the hot air dryer/blow torch is at least 30cm away from the artwork).

To avoid any contamination with dust during the curing process, ensure the artwork is covered with a dust sheet / box. 

Ask a Question
This depends on the temperature of your working conditions and how much catalyst has been incorporated into the mix. Warmer temperatures will reduce your curing time and colder temperatures will increase the length of cure.  Likewise, adding extra catalyst will speed up the curing process - often necessary for colder temperatures and reducing catalyst will reduce curing - again often necessary during warmer temperatures. We would recommend mixing no more than 1.5 - 2kg at a time. Once the resin and catalyst are mixed, the curing process will begin and you are working against the clock to get the resin applied - usually no more than 20 minutes. Only mix as much as you need.  Epoxy Resin is mixed on a ratio basis and should not be altered. Room temperature is the ideal scenario for curing. Each resin type will differ so we would always recommend referring to the MSDS and TDS available on each product listing before use.  Although some resins may be hard to the touch after 24 hours, some may not be fully cured for up to 3 days. Again, this information will be available on the product Technical Data Sheet... Read more
Brand Description
History Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien.