AT 195 External Roofing Trim - 3 metre length
SKU
9907008
In stock
Quick Overview
Dimensions Girth: 195mm; Flange widths: 85mm & 105mm
£15.48
£12.90
Please note if purchasing 1 x 3 metre trim, the trim will arrive as 2 x 1.5 metre sections. This is to prevent damage in transit.
The AT 195 External trim is used to cover the top edges of parapet walls prior to encapsulation with Fibreglass.
Dimensions
Girth: 195mm; Flange widths: 85mm & 105mm
Fitting Instructions
The trim is supplied with a high adhesion finish on its outer fascia. The trim should be nailed at both edges if possible. Always bandage over the join between where the nails penetrate the trim and the decking before applying the laminate.
This corner is used where a flat roof meets an existing wall. It is compatible with A200,B260 and D260 trims.
Ask a Question
The following trims are compatible with each other
- A200 is a fascia trim for allowing drainage into a gutter. Compatible with C1 C2 and C4 corner trims
- B260 is a raised edge trim which prevents water runoff. Compatible with C1 C2 and C4 corner trims
- A200 and the B260 are compatible with each other
- A250 and B300 - A250 is a fascia trim for allowing drainage into a gutter & the B300 is a raised edge trim which prevents water runoff
