Fitted to the roof edge, this trim prevents water runoff. This trim is compatible with the A200 Drip Roofing Trim.
Dimensions
Girth: 260mm, Depth: 125mm, Length: 3 metres
Please note if purchasing 1 x 3 metre trim, the trim will arrive as 2 x 1.5 metre sections. This is to prevent damage in transit.
Fitting Instructions
A single batten is fixed level with the top edge of the deck. Apply 30mm beads of trim adhesive to the batten every 300mm, rub the trim into place and nail through the top of the trim into the decking. Do not nail through the front of the trim.
If a ladder is likely to be leaning up against a B type trim for regular access to the roof, the trim will need to be reinforced to avoid deformation. The trim can either be doubled up by slotting a section of extra trim within the section where the ladder will be used or it can be reinforced with an extra layer of GRP laminate and then tissue to maintain a smooth finish. Alternatively, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid.
This trim is compatible with the A200 Drip Roofing Trim.
View all of our Fibreglass Roofing Trims
A drip trim is placed at the lowest edge of the roof and is used to allow the water to runoff into a gutter. A raised edge trim is used to prevent the water runoff.
Brand | Description |
History | Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien. |