C1 Universal External Corner Trim
SKU
9907011
In stock
Quick Overview
The C1 is a hot press moulded GRP pre-formed external corner. It is for use with A200 and B260 profiles to form a left or right hand corner.
£8.40
£7.00
Fitting Instructions
The corner should be nailed to the deck at each end and in the middle.
The joins between the trim and the corner should be sealed with a thin line of PU trim adhesive, a moist finger can be used to wipe the adhesive, ensuring it seals the entire joint.
The joint is then bandaged over. Tissue should be used to ensure a smooth finish.
The corner should be nailed to the deck at each end and in the middle.
The joins between the trim and the corner should be sealed with a thin line of PU trim adhesive, a moist finger can be used to wipe the adhesive, ensuring it seals the entire joint.
The joint is then bandaged over. Tissue should be used to ensure a smooth finish.
Ask a Question
The following trims are compatible with each other
- A200 is a fascia trim for allowing drainage into a gutter. Compatible with C1 C2 and C4 corner trims
- B260 is a raised edge trim which prevents water runoff. Compatible with C1 C2 and C4 corner trims
- A200 and the B260 are compatible with each other
- A250 and B300 - A250 is a fascia trim for allowing drainage into a gutter & the B300 is a raised edge trim which prevents water runoff
We found other products you might like!