1. See Detail

D260 Wall Fillet Roofing Trim - 3 metre length

SKU
9907001
In stock
Quick Overview
Dimensions: Girth: 260mm Fillet: 135mm & 70mm Upstand height: 120mm Length: 3m

Used where flatroof butts against existing wall and creates a 45 degree angle to deflect rainwater from wall to roof. Can also be used for gutter lining. It will also provide expansion and perimeter ventilation and is compatible with C2 and C3 universal corners.
£13.08 £10.90
Fitting Instructions:

Place the D trim against the vertical face and push down diagonally into the corner until the trim fits snugly. Where the D trim needs to be joined it should be bonded with a strip polyurethane adhesive and bandaged together. The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc. Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim.

Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in. A smooth finish can be obtained by wiping the sealant with a moistened finger.

Roofing Trim FAQ's

Q. Which roofing trims are compatible with each other?

Q. What is the difference between a drip roofing trim and raised edge trim?

Q. What is the best way to apply roofing trims?

Q. Should I use special nails to secure the trims?

Q. I have a crack in my GRP Roofing Trim – how do I fix it?

Q. Can I use lead or metal trims with a GRP Roof?

Ask a Question
The following trims are compatible with each other
  • A200 is a fascia trim for allowing drainage into a gutter. Compatible with C1 C2 and C4 corner trims
  • B260 is a raised edge trim which prevents water runoff. Compatible with C1 C2 and C4 corner trims
  • A200 and the B260 are compatible with each other
  • A250 and B300 - A250 is a fascia trim for allowing drainage into a gutter & the B300 is a raised edge trim which prevents water... Read more
    Published in: Roofing Trims