The E280 Expansion Joint is normally used on fibreglass flat roofs which are 50 square metres and over. It can also be used to create rolls on any ridge details. It is compatible with C5 preformed closures.
Used where flat roof butts against existing wall and creates a 45-degree angle to deflect rainwater from wall to roof. Can also be used for gutter lining. It will also provide expansion and perimeter ventilation and is compatible with C2 and C3 universal corners.
Girth: 260mm; Fillet: 135mm & 70mm; Upstand height: 120mm; Length: 1.5 metre / 3 metre
The B300 Roof Trim for Fibreglass Roofing is fitted to the edge of the flat roof to prevent water run-off. The depth of this drip matches the A250 Drip Trim. This trim is also compatible with the C1, C2 and C4 corner trims.
The AT195 External Fibreglass Roofing Trim is used when forming external corners on features such as steps or wall tops, it can be used horizontally or vertically. If an Internal Corner is needed, the AT195 Internal Trim is ideal.
The AT195 Internal trim is used wherever the laminate needs to cover an area which continues perpendicular to another laminated surface. The AT195 Ext is supplied with a high-adhesion finish on its outer fascia and is mainly used for capping applications.
The calculations provided are based on the information given. Tricel cannot be held responsible for the use made of the products thereafter. Copyright � 2017 Tricel Composites (NI) Ltd. All rights reserved.